JCB 18Z-1 Mini Digger Specifications

The 18z-1 provides little downtime and maximum profits thanks to long-lasting components and simple, cost-effective repairs.

Innovative assembly techniques and cutting-edge production procedures contribute to the greatest level of construction quality and durability.

The dig end is buffed for optimal durability, and hoses are run via the boom and dipper.

Bodywork made entirely of steel that can withstand hits while staying cost-effective to repair.

The first model with zero tailswing, which protects the machine and its surroundings.

Most occupations are stressful enough without having to deal with tough and regular maintenance, hard-to-reach cleaning, and, of course, unpleasant working conditions. That's why we've made things easier for you.

The 180° opening service door makes cleaning and maintenance easier.

An easily accessible outside lockable gasoline tank adds to the security.

Right-hand panel has basic button actions, as well as easy-to-understand indications and cautions.

Fine attachment control is possible using electro proportional control.

When time is money, and going from one work to the next quickly is a big advantage, the New Generation Minis don't waste time.

Ten tie down points and four lifting points help in machine transportation.

The slanted undercarriage decreases soil retention and facilitates cleaning.

Turnaround times are minimised since there is no daily greasing and maintenance and cleaning is easy to reach.

Use industry standard bucket centres and pin sizes for the most attaching options.

As working circumstances grow more limited, safety becomes increasingly crucial. Jcb has always been at the forefront of site safety, constantly seeking for innovative ways to improve it.

The safety system on the JCB 2GO is a one-of-a-kind feature.

The cabs meet all ROPS and FOPS requirements.

Excellent all-around visibility is critical for increased on-site safety.

When the control pod is lifted, all services are disconnected as an extra safety step.

The New Generation Minis are all intended to maximise your revenues, so you can focus on your business.

To decrease downtime, 500-hour grease intervals are employed.

The minimum front swing radius has been decreased for work in the narrowest of areas.

The 18Z-1's transport weight enables it to be towed to its destination.

JCB 8025 ZTS Mini Digger Specifications

Performance and Productivity

The 8025 delivers remarkable tearout forces as well as high tractive effort and tracking speeds thanks to its 1.5-liter engine.

Excellent digging ability with excellent tractive effort and tearout forces.

More manoeuvrability is provided by ZTS, particularly in congested areas.

The powerful 'Maxi'Raise' dozer can simply lift the machine, allowing it to carry more weight over a greater distance.

The 8025 is small enough to be hauled behind a 3500kg car.

Quality, dependability, and long-term durability

The 8025 Mini Excavator has genuine 0% tailswing and meets the growing need for smaller equipment with more power, productivity, and speed.

The heavy-duty H-frame undercarriage is intended to last and offers reassuring stability.

Because of the basic design and sturdy components, reliability is built in.

Dirt is kept out of the way by a sloping track structure.

Excavator hoses are run on top of the boom to give optimum protection against damage.

Serviceability and safety

Jcb has always been at the forefront of site safety, always seeking innovative ways to improve it. The 8025 Zts prioritises the safety of the machine's owner, operator, onlookers, and other people.

All ROPS and TOPS requirements are met by the cab.

Optional boom and cab worklight shields provide additional protection in hazardous settings.

True ZTS design increases safety in limited spaces by minimising the chance of collision.

Between services, there are 500-hour periods.

The Optimal Operating Environment

Zero-tailswing mini excavator cabs are infamously confined workspaces. The Jcb series, on the other hand, is distinguished by its roomy and pleasant operator environment.

The 8025 offers the operator with a large and comfortable work space.

With an effective heating system, you can reach the most comfortable temperature.

The amount of vibration should be limited to a bare minimum.
There is great visibility from the working posture.

JCB 35Z-1 Mini Digger Specifications

Ultimate Comfort

Our New 3.5 Tonne Excavator Cabs Have Been Upgraded to Provide Easy-to-See Information and Controls, Making Them Great Working Environments.

Bluetooth radio with hands-free, auxiliary plug, and 12V phone charging

The machine health-check system guarantees that your machine is in excellent working condition at the start of each day.

For all-day operator comfort, there is fully adjustable suspension sitting with separate adjustable settings.

Superior Performance

A Perkins 18.4kw Stage V Engine powers the new Jcb 35z-1, and a new electronically controlled pump is perfectly matched to help with even the most difficult tasks.

With the addition of new hydraulic attachments, the operation of the hydraulic attachments has been improved.

Electro Proportional Joysticks are a type of joystick that is used to control the movement of an object.

Select from a variety of Jcb attachments, including one that is fresh new.

For the range, a thumb attachment.

Combined with quick cycle times, bucket tearout forces of up to 32.0kN provide unrivalled productivity.

Serviceability

The new 35z-1 has safety and serviceability features that safeguard machines, operators, and onlookers while decreasing downtime.

The wide-opening steel hood and external fuel cap make refuelling and daily inspections safe and uncomplicated.

On the initial key-on of the day, the operator can monitor machine status by completing a machine health check.

You can control your fleet using the Livelink feature at the press of a button.

The Jcb 2go System is one-of-a-kind.

Cost Effective

The New Jcb 35z-1 Was Designed to Reduce Operating Costs While Providing You With More Than Just Great Performance and Long Service Life.

Our Graphite Impregnated Bronze Bushes have 500-hour grease intervals, which means less downtime.

Hydraulics for Load Detection Only use energy when it's really necessary.

Using programmable auto-idle and four different engine modes, fuel consumption is further reduced.

You Can Turn Around Quickly with an Easy-to-Clean Sloping H-frame Undercarriage.

JCB 19C-1 Mini Digger Specifications

Durable

The 19c-1 was developed and engineered to endure the harshest work environments. They assure little downtime and maximum revenues by using long-lasting components and simple, low-cost repairs.

Innovative assembly techniques and state-of-the-art manufacturing processes help achieve the highest build quality and durability.

For maximum durability, hoses are run via the boom and dipper.

Steel bodywork that can absorb hits while being cost-effective to repair.

Easy To Operate

Most jobs are stressful enough without having to deal with difficult and frequent servicing, difficult-to-reach cleaning, and, of course, uncomfortable working conditions. That's why we've simplified things for you.

180° Opening Service is a service that allows you to open your door at any angle. Cleaning and maintenance are a breeze with this door.

Extra security is provided by an easily accessible external lockable fuel tank.

Right-hand panel has simple button functions, as well as indicators and warnings that are easy to see.

Electro Proportional Control Allows Precise Attachment Control.

When time is money, and going from one work to the next quickly is a big advantage, the New Generation Minis don't waste time.

To guarantee that the machine is transported swiftly, there are ten tie-down points and four lifting points.

The slanted undercarriage design makes cleaning easier and reduces soil retention.

There is no need to oil every day with simple access to maintenance and cleaning, resulting in speedier turnaround times.

Industry Standard Bucket Centers and Pin Sizes for Maximum Attachment Versatility

As working circumstances grow more constrained, safety becomes increasingly crucial. Jcb has always been at the forefront of site safety, always seeking innovative ways to improve it.

The Jcb 2go Safety System is a unique system.

Cabs follow Rops and Fops to the letter.

Excellent all-around visibility is critical for increased on-site safety.

The Lift Overload Warning System on the 19c-1 Pc provides optimal stability and safety.

The New Generation Minis are all designed with your profits in mind, allowing you to simply get on with your work.

For Less Downtime, Greasing Intervals of 500 Hours are used.

Reduced Front Swing Radius for Working in Tight Spaces.

Exceptional visibility down to the dozer blade thanks to the large glass area.

Heater with two speeds for maximum operator comfort.

JCB 8026 CTS Mini Digger Specifications

Productivity And Performance

When it comes to lifting and stability, he is unquestionably the best in the class. The 8026 Cts Raises the Bar on Mini Excavator Productivity.

Tearout performances by Bucket (23kn) and Dipper (17kn).

Compared to the Zts Model, the Lift Capacity Over the Tracks is 82 percent higher.

The'maxi'lift' Dozer can easily raise the machine to get more load over height.

The 8026 is light enough to be towed behind a vehicle capable of towing 3500kg.

Reliable And Excellent Quality

It's trouble-free, dependable, and built to last. The 8026 is a little device with a big punch.

High-quality 250mm wide tracks perform wonderfully in the most demanding situations.

The track durability is improved by a top-mounted roller in the undercarriage design.

The box section dozer arms give the utmost strength.

Because of the basic design and sturdy components, reliability is built in.

Security And Safety

JCB has always been on the cutting edge of site safety and is continually looking for new ways to improve it. The 8026 cts puts the safety of the owner, operator, spectators, and the machine itself first.

All services are separated when the control pod is lifted.

Optional boom and cab worklight shields safeguard sensitive components in hazardous applications.

A hose-burst check valve option sounds an alert when the safe work load is exceeded.

Routine inspections are made simple by service access panels that open wide.

Comfortable Cabin Environment

Putting the operator first makes life easier. The 8026 provides precise control in a safe and comfortable setting.

The cab environment is larger and more roomy than ZTS versions, with 50mm additional legroom.

With an effective heating system, you can reach the most comfortable temperature.

The amount of vibration should be limited to a bare minimum.

There is great visibility from the working posture.

JCB 36C-1 Mini Digger Specifications

Durability

Customers want high-quality, trustworthy, and long-lasting machines. That's why our 3.5-tonne excavators have been designed and built to last.

Our mini excavators have a strong and easy-to-repair STEEL body.

The kingpost incorporates sturdy re-bushable pivots to help it last longer.

When the cab door is folded back, it lies inside the counterweight length, shielding it from damage while in use.

Ultimate Comfort

Our new 3.5 tonne excavator cabs have been enhanced to give easy-to-read information and straightforward controls, making them outstanding working conditions.

Bluetooth radio with hands-free, auxiliary plug, and 12V phone charging

The machine health-check system guarantees that your machine is in excellent working condition at the start of each day.

For all-day operator comfort, there is fully adjustable suspension sitting with separate adjustable settings.

Superior Performance

A Perkins 18.4kw stage v engine powers the new jcb 36c-1, which is ideally paired with a new electronically controlled pump to aid with even the most challenging tasks.

The hydraulic attachments now operate more smoothly thanks to new electro proportional joysticks.

Select from a variety of JCB accessories, including a brand-new thumb attachment for the range.

Combined with low cycle durations, bucket tearout pressures of up to 32.0kN result in unrivalled productivity.

Safety And Serviceability

Safety and serviceability features on the new 36c-1 safeguard machinery, operators, and spectators alike, while also reducing downtime.

The wide-opening steel hood and external fuel cap make refuelling and daily inspections safe and uncomplicated.

On the initial key-on of the day, the operator can monitor machine status by executing a machine health-check.

You can operate your fleet with a single button push if you use the LiveLink option.

The JCB 2GO system is unique in the industry.

Affordable

The new jcb 36c-1 is engineered to keep running costs low while delivering great performance and a long service life.

Our graphite-impregnated bronze bushes have 500-hour greasing intervals, which means less downtime.

Load sensing hydraulics conserve energy by only utilising it when it is required.

Using programmable auto-idle and four different engine modes, fuel consumption is further reduced.

You can turn around fast with an easy-to-clean sloping H-frame undercarriage.

JCB 270 Skid Steer Loader Specifications

Performance And Power

With lots of power and a variety of functions, JCB sets new benchmarks for efficiency and productivity in skid steer loaders.

No post-treatment exhaust is required for the efficient 44kW JCB Diesel driven by a Kohler T4F engine. A standard quick hitch for connecting to all JCB accessories and other manufacturers.

The usual flow rate of the hydraulic circuit is 70 lpm. A high-flow model with a flow rate of up to 115 lpm is provided for maximum attachment adjustability.

JCB's Smoothride System (SRS) allows for improved load holding and faster loading operations.

Durability

JCB's skid steers are famed for their tough design, and they're engineered to resist the rigours of any application or environment.

A completely welded chassis guarantees a sturdy construction that is both strong and light.

For ultimate impact protection, the PowerboomTM provides secure internal hydraulic hose routing.

A stable performance on tough terrain is ensured by a sturdy undercarriage.

For additional breakout power, JCB skid steers feature the industry's biggest fast hitch pivot pins.

Superior Safety

Because it has a wide-opening side door for secure access and egress, operators no longer need to climb over large attachments or beneath an unsupported boom.

A wide-opening side door allows for easy and secure entrance and egress.

When compared to standard twin-arm machines, visibility around the machine is 60 percent greater.

Tasks like loading a vehicle or changing attachments are made easy due to the superb vision.

Simple Service

Low-maintenance and serviceable Skid steer loaders made by JCB are affordable, efficient, and productive.

All of the daily checks may be done from the ground.
Pre-filters, oil, and air filters are all easily accessible thanks to a large, recessed rear service door.

The tilting cabs from JCB are easy to use and open in a matter of minutes.

Leaks and maintenance downtime are reduced using hydraulic fittings featuring an O-ring face seal.

Comfort And Usability

With a comfortable side-door entrance, the biggest cabins on the market, electric controls, and customizable joystick controls, JCB skid steer loaders deliver unrivalled comfort for maximum efficiency.

On small platform machines, JCB cabs are 46% bigger than the competition.

Operators may tailor the sensitivity of joystick movement to their unique demands using JCB's myCHOICE control software.

Depending on the operator's choices, ISO or H-pattern controls are available.

An AUX input on the radio allows you to attach your phone or other device.

JCB 155 Radial Lift Skid Steer Loader Specifications

Performance And Power

With lots of power and a variety of functions, JCB sets new benchmarks for efficiency and productivity in skid steer loaders.

No post-treatment exhaust is required for the efficient 44kW JCB Diesel driven by a Kohler T4F engine. A standard quick hitch for connecting to all JCB accessories and other manufacturers.

The usual flow rate of the hydraulic circuit is 70 lpm. A high-flow model with a flow rate of up to 115 lpm is provided for maximum attachment adjustability.

JCB's Smoothride System (SRS) allows for improved load retention and faster loading cycles.

Durability

JCB's skid steers are famed for their tough design, and they're engineered to resist the rigours of any application or environment.

A completely welded chassis guarantees a sturdy construction for maximum strength and weight reduction. For ultimate impact protection, the PowerboomTM provides secure internal hydraulic hose routing.

A stable performance on tough terrain is ensured by a sturdy undercarriage.

For additional breakout power, JCB skid steers feature the industry's biggest fast hitch pivot pins.

Ultra Safe

Because it is a wide-opening side door for secure access and egress, operators do not need to climb over large attachments or beneath an unsupported boom.

A wide-opening side door allows for quick and secure entrance and escape.

When compared to standard twin-arm machines, visibility around the machine is 60% greater.

Tasks like loading a vehicle or changing attachments become easier due to the increased visibility.

Simple Servicing Needs

Low-maintenance and easy-to-maintain Skid steer loaders made by JCB are affordable, efficient, and productive.

All of your daily checks may be done from the ground.

Pre-filters, oil, and air filters are all easily accessible thanks to a large, recessed rear service door.

The JCB tilting cabs are easy to operate and open in a couple of minutes.

O-ring face seal hydraulic fittings prevent leaks and maintenance downtime.

Control And Comfort

With a comfortable side-door entrance, the biggest cabins on the market, electric controls, and customizable joystick controls, JCB skid steer loaders deliver unrivalled comfort for maximum efficiency.

On small platform machines, JCB cabs are 46% bigger than the competition.

Operators may tailor the sensitivity of joystick movement to their unique demands using JCB's myCHOICE control software.

Depending on the operator's choices, ISO or H-pattern controls are available.

An AUX input on the radio allows you to attach your phone or other device.

JCB 215 Skid Steer Loader Specifications

Performance And Power

With lots of power and a wide range of functions, JCB sets new benchmarks for efficiency and productivity in skid steer loaders.

Unlike typical skid steer cooling systems, JCB's cooling system draws cold, clean air from above and directs hot air away from the operator out the sides and rear.

All JCB machines are equipped with an industry-standard quick hitch for easy connection to JCB and other manufacturers of attachments.

Normal hydraulic circuit speed for JCB small platform machines is 70 lpm. A high-flow version with up to 115 lpm is provided for maximum attachment adjustability.

A parallel lift is available on all JCB models, making loading with forks or accessories easier.

The JCB Smoothride System (SRS) allows the boom and load to move independently of the chassis, enhancing load retention, operator comfort, and loading cycle speed.

Durability And Strength

JCB's skid steers are famed for their tough design, and they're engineered to resist the rigours of any application or environment.

A completely welded chassis guarantees a sturdy construction that is both strong and light.

For ultimate impact protection, the PowerboomTM provides secure internal hydraulic hose routing.

A stable performance on tough terrain is ensured by a sturdy undercarriage.

For additional breakout power, JCB skid steers feature the industry's biggest fast hitch pivot pins.

Superior Safety

Because it has a wide-opening side door for secure access and egress, operators no longer need to climb over large attachments or beneath an unsupported boom.

A wide-opening side door allows for easy and secure entrance and egress.

When compared to standard twin-arm machines, visibility around the machine is 60 percent greater.

Tasks like loading a vehicle or changing attachments are made easy due to the superb vision.

Simple Servicing

Because it is a wide-opening side door for secure access and egress, operators do not need to climb over large attachments or beneath an unsupported boom.

A wide-opening side door allows for quick and secure entrance and escape.

When compared to standard twin-arm machines, visibility around the machine is 60% greater.

Tasks like loading a vehicle or changing attachments become easier due to the increased visibility.

JCB Teleskid 3TS-8W Skid Steer Loader Specifications

Perfect For

You can load a lorry without utilising a ramp thanks to Teleskid's 3.1 metre dump height.

With a height of over 13 feet, you can load trucks or feeders quickly and effortlessly without the necessity of a ramp.

The JCB Teleskid can handle even the heaviest loads, with a lift capability of 3695Ib (3TS-8T).

The basic 2-speed gearbox cuts travel and cycle times in half.

Set a pallet on the second level, then grade a site with Teleskid's extending boom.

The boom is mounted on a single-piece fully welded frame to maximise strength and save weight.

The high-strength steel boom's single-piece u-pressed structure minimises seams and stress points.

JCB's Teleskid mono-boom design features a 270-degree field of vision. The use of laminate side glass instead of mesh improves overall visibility.

Teleskid's forward reach of 2.2 metres allows you to reach over a retaining wall.

It can go places and do things that others can't since it has a vertical reach of nearly four metres and a forward reach of more than two metres.

Reaching around 1 metre into the earth, you can take out trees and roots.

When the boom is completely extended, a normal hydraulic flow rate of 90 l/pm allows you to operate attachments, but when the boom is fully retracted, 125lpm high flow couplers allow you to securely run high flow attachments.

Teleskid's 1 metre reach under the wheels enables you to dig deeper into the ground.

Load and unload a standard 8-foot trailer from one side to save turnaround time.

A conventional electric quick hitch helps load visibility and prevents material collection.

Track retention is ensured by a strong undercarriage with triple flanged cast steel rollers.

Teleskid's forward reach of 2.2 metres allows you to reach over a load without clashing with it.

The first skid steer and small track loader with vertical and radial lift.

With an SAE operating weight of 12615lbs for the compact track loader and 9859lbs for the skid steer loader, the JCB Teleskid may be easily transported between sites on a trailer.

The skid steer loader has a load capacity of 1300 pounds, while the compact track loader has a load capacity of 1600 pounds at full extension, allowing big objects to be put without damaging the ground.

JCB 8008 CTS Micro Excavator Specifications

Productivity

Jcb micro excavators are notable for their small size as well as their high power.

Even in the tiniest of areas, the compact design delivers exceptional performance.

Because of the improved digging strength and lift capabilities, larger attachments may be employed.

An expanded undercarriage provides increased stability as well as class-leading dig depth and reach.

There is plenty of legroom, and the change-over controls are simple.

Serviceability

The jcb 8008 cts was designed to boost production while lowering labour costs.

Daily service checks are easy to do and take little time.

You can get a full day's worth of use out of an 11.5 litre gas tank without having to stop what you're doing to fill up.

A trailer allows for a quicker transition from one site to another.

All functionalities are independent of one another for simplicity of usage.

JCB 8010 CTS Micro Excavator Specifications

Productivity

Jcb micro excavators are distinguished by their tiny size and tremendous power.

Even in the tiniest of areas, the compact design delivers exceptional performance.

Because of the improved digging strength and lift capabilities, larger attachments may be employed.

An expanded undercarriage provides increased stability as well as class-leading dig depth and reach.

There is plenty of legroom, and the change-over controls are simple.

Serviceability

The jcb 8010 cts was designed to boost production while lowering labour costs.

Daily service checks are easy to do and take little time.

You can get a full day's worth of use out of an 11.5 litre gas tank without having to stop what you're doing to fill up.

A trailer allows for a quicker transition from one site to another.

All functionalities are independent of one another for simplicity of usage.

131X Tracked Excavator Specifications

Exceptional Strength

It took four years of research and development, as well as thousands of hours of intense endurance testing, to create a machine that not only looks but also performs well.

Simulating 15,000 hours of monitoring and vibration on a machine shaker rig.

To assure component quality, a total of 30,000 window and door operational tests were done.

Testing in controlled environments in hot and cold climes (55°C to -30°C) across the world.

The 220X Dieselmax engine has been tested for 110,000 hours in 70 different machines under the most extreme circumstances.

Comfort

With riding comfort and low noise levels that rival the finest in the business, even the most demanding operator will be satisfied.

In the JCB CommandPlus cab, you'll find the industry-leading Grammer seat.

The adoption of double-cushioned viscous mounts contributes to a 67dB in-cab noise level (A).

The new powerful HVAC system offers excellent performance in both hot and cold environments, with 11 vents. As standard equipment, climate control is offered.

Roof, front, rear, and side window shades are all supplied as standard, so the whole cab is protected.

Superior Performance

We've spent years listening to thousands of clients like you as we researched and developed a machine that would function in the harshest circumstances.

Large-diameter hydraulic pipes and hoses for increased output and efficiency.

A one-of-a-kind hydraulic regeneration system that recycles oil between cylinders.

You may save up to 5% on your gas cost by using auto-stop and auto-idle modes.

There is no need for DEF because the 131X Stage V employs a DOC and DPF for exhaust after treatment, resulting in lower running costs.

Control

After four years of hydraulic development and the use of dependable Japanese components, the best balance of controllability and efficiency was reached.

While on the move, the joystick may be used to change the tracking speed.

The user can set their favourite speed and attachment control using adjustable proportional controls.

By supplying high torque during accelerating and braking, slew drive improves controllability and refinement.

140X Tracked Excavator Specifications

Ultra Strength

The design process required four years and tens of thousands of hours of testing. To design a machine that is not only beautiful to the eye but also practical.

Simulating 15,000 hours of monitoring and vibration on a machine shaker rig.

To assure component quality, a total of 30,000 window and door operational tests were done.

Testing in controlled environments in hot and cold climes (55°C to -30°C) across the world.

The 140X EcoDieselmax engine has been tested for 110,000 hours in 70 different machines under the hardest conditions.

Comfort

The Grammer seat is standard on the JCB CommandPlus cab.

The use of double-cushioned viscous mounts aids in the achievement of a 67dB in-cab noise level. (A).

The new powerful HVAC system offers excellent performance in both hot and cold situations, with 11 vents.

Superior Performance

We've spent years listening to thousands of clients like you as we researched and developed a machine that would function in the harshest circumstances.

Large-diameter hydraulic pipes and hoses for increased output and efficiency.

A one-of-a-kind hydraulic regeneration system that recycles oil between cylinders.

You may save up to 5% on your gas cost by using auto-stop and auto-idle modes.

The bigger bucket cylinder is responsible for the 11% increase in bucket rip out.

Control

After four years of hydraulic development and the use of dependable Japanese components, the best balance of controllability and efficiency was reached.

After four years of hydraulic development and the use of dependable Japanese components, the best balance of controllability and efficiency was reached.

With configurable proportional controls, the operator may set their own speed and attachment control.

The accuracy and effectiveness of Japanese hydraulics are well-known.

The operator can select between Auto-Stop and Auto-Idle, depending on his or her preferences.

150X Tracked Excavator Specifications

Ultra Strength

The design required four years and tens of thousands of hours of testing. To design a machine that is both aesthetically pleasing and functionally sound.

Simulating 15,000 hours of monitoring and vibration on a machine shaker rig.

To assure component quality, a total of 30,000 window and door operational tests were done.

Testing in controlled environments in hot and cold climes (55°C to -30°C) across the world.

The 150X EcoDieselmax engine has been tested for 110,000 hours in 70 different machines under the hardest conditions.

Comfort

With riding comfort and low noise levels that rival the finest in the business, even the most demanding operator will be satisfied.

The industry-leading Grammer seat comes standard on the JCB CommandPlus cab.

The adoption of double-cushioned viscous mounts contributes to a 67dB in-cab noise level. (A).

The new powerful HVAC system offers excellent performance in both hot and cold environments, with 11 vents.

Performance

We've spent years listening to thousands of clients like you as we researched and developed a machine that would function in the harshest circumstances.

Large-diameter hydraulic pipes and hoses for increased output and efficiency.

A one-of-a-kind hydraulic regeneration system that recycles oil between cylinders.

You may save up to 5% on your gas cost by using auto-stop and auto-idle modes.

The bigger bucket cylinder is responsible for the 11% increase in bucket rip out.

Control

After four years of hydraulic development and the use of dependable Japanese components, the best balance of controllability and efficiency was reached.

With configurable proportional controls, the operator may set their own speed and attachment control. Precision and efficiency have been demonstrated in control.

The accuracy and effectiveness of Japanese hydraulics are well-known. The operator can select between Auto Stop and Auto Idle, depending on their preferences.

The power boost button increases pressure by 9% for up to 9 seconds in challenging circumstances, allowing for greater rip out.

JCB JS190 Tracked Digger Excavator

Productivity

We've double-checked that the js190's components are in perfect sync. Making certain that you save both money and time.

Quickhitch technology allows you to change attachments quickly and easily.

For optimum adaptability, JCB provides a wide selection of auxiliary piping options, including hammer, auxiliary, and low flow.

With a massive 119kN kgf bucket tearout and low cycle durations, the JS190 is extremely productive in all applications.

Comfort

The js190 is built with the operator in mind. Great productivity means great comfort and ease of usage.

The 7-inch colour multi-function display provides real-time operating data and is easy to view in all lighting conditions.

A distinctive low-level hood provides excellent rearward view.

The Advanced Tool Select feature makes it simple to build up auxiliary hydraulic circuits to meet the flow and pressure requirements of an attachment.

Less Servicing

The js190 was designed to be low-maintenance and simple to maintain. It will become more cost-effective, efficient, and productive as a result.

The air filter of a JS190 is easily accessible, and the double-element construction makes cleaning easy.

Because the engine radiator, hydraulic cooler, and intercooler are all located next to one other, they may all be repaired and cleaned independently.

Because the EcoMAX engine does not require exhaust after treatment, it does not require expensive heat-resistant lubricating oils.

Safe Choice

We created the js190 with as many cutting-edge measures as possible because on-site safety is so vital.

The JS190's cab may be fitted with an integrated Rollover Protection Structure for further peace of mind (ROPS).

The JCB Safety Level Lock isolates hydraulic operations fully to avoid unintended movements.

Thanks to our 2GO technology, a JCB JS190 can only be started in a secure locked position utilising two distinct inputs.